NETGEAR MA401 Reference Manual page 39

Reference Guide for the Model MA401 802.11b Wireless PC Card
Install the MA401 driver and
configuration utility
software, continued.
The Resources and
f.
Properties window opens.
Refer to the Wireless
parameter configuration
chapter and modify any
entry if necessary. Click on
OK.
The system returns back to
g.
the Network window. Click
on Close.
If TCP/IP is enabled, the
h.
system will prompt you for
an IP address or use DHCP.
Answer accordingly.
When prompted,
i.
to reboot the system.
You should now see the
Windows system tray icon
on the right in the lower
right portion of the
Windows task bar.
Note: The I/O Address
and IRQ settings should
be unique and not conflict
with any other device
settings in you system. If
there is a system resource
conflict, please check
Windows NT Diagnostics
and find a free I/O
address and IRQ.
Installing the MA401 802.11b Wireless PC Card
click Yes
MA401 LAN Configuration Utility
System Tray Icon
2-21