Installing The Blade - Sears CRAFTSMAN 113.247411C Owner's Manual

INSTALLING THE BLADE
LOCK KNOB
1. Loosen the upper blade guide assembly and
lower to approximately 3 inches above rear table
and retighten lock knob. This is
necessary to
make adjustments to blade guide and back
up
roller bearing.
UPPER BLADE
GUIDE ASSEUBL
II
I
A,1
2.
Remove
the blade guard by loosening the two
(2)
mounting
screws
with
a
phillips screwdriver
and
lifting the blade guard
upward.
BLADE GUARD
MOUNT}NG
SCREW
BLADE GUARD
MOUNTING
SCREW
3. Loosen the two capscrews that lock the upper
blade guides using a 1/8-inch hex "L" wrench
and separate them about 1/8-inch.
Repeat the
same
step for the lower blade guides.
m
BLADE GUIDE CAPSCREWS
BLADE GUIDE
CAPSCREWS
4. Loosen the setscrew which locks the blade guide
support and push the support all the way
back.
Repeat for lower blade guide support.
UPPER BLADE
GUIDE SUPPORT
SETSCREW
DE
aRT
/