Table of Contents
Advertisement
location and function of the electronic indicator
system
BATTERY COVER RELEASE SLOTS
BATTERY COVER
\WP
BATTERY
ON/OFF
KEY
BEVEL ANGLE
KEY
BLADE
TENSION
KEY
LADE
SPEED
KEY (FT. PER MIN.)
itgig/Rn£BPW
REFERENCE
SET
KEY
DIGITAL
READOUT
DISPLAY
DIGITAL READOUT
DISPLAY
FUNCTION
KEYS
The Liquid Crystal
Display,
or
LCD,
on this
saw
gives the user the ability to accurately position the
blade and monitor the set-up. The three functions
displayed
are:
Bevel
Angle - Shows the present angle of the
blade
tothetable. The Ea
key
isusedtosetthezero
degree point.
Blade Tension - Displays the blade size for which the
tension has been adjusted.
Blade Speed - Displays the speed of the blade
in
surface feet per minute (FPM).
NOTE: The function being displayed is indicated by
an abbreviated name of the function in the left hand
area of the display; either BEV, TEN, or FPM.
The five keys located to the right of the display are
the function
keys.
They
are:
@
– Turns the display "On" or "Off"
U
–
Selects
the
Bevel
Angle display
Ba
– Selects the Blade Tension display
\n+/
B
– Selects the Blade Speed display
By
–
Sets
the Bevel Angle to
Zero
NOTE:
in order to extend battery life the display will
shut off approximately five
(5)
minutes after the last
key
was
pressed.
BATTERY COVER
The Battery Cover covers the battery compartment.
To
release-the
cover, insert a small coin into one of
the
release
slots and twist. Remove the cover.
1. Installing the
Battery
The
battery
is
supplied with the loose parts. It
is
a
6-volt, type J alkaline battery. Install the battery
with the contact end down and the "+" terminal
towards the left. Push the battery down and back
until the top edge
of
the battery
is
caught under
the ribs in the compartment. Do not force
the
battery. It if doesn't push in easily, remove the
battery arId check that it is positioned correctly.
2. Reinstall battery covery by inserting the tabs
on
the lower edge of the cover into the
mounting
holes in the control and pushing the cover int6
position.
18
Advertisement
Table of Contents
