Table 1. SD665 V3 tray indicators, controls, and connectors (continued)
5
25 Gb SFP28 Ethernet port (Port 1) with
share-NIC feature for Lenovo XClarity
Controller. See
"Front LEDs" on page 6
more information.
Lenovo XClarity Controller connection is
mutually exclusive between RJ45 Ethernet
connector and 25Gb SFP28 Port 1.
6
25 Gb SFP28 Ethernet port (Port 2). See
"Front LEDs" on page 6
for more information.
Top view
This section contains information on the top view of the solution.
Figure 2. Compute node top view
Table 2. Components on the compute node top view
1
System board
2
Water loop quick connect
3
Power distribution board
4
Processor cold plates
5
Memory module cooling tube
KVM breakout cable
Use this information for details about the KVM breakout cable.
2
ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide
11
KVM breakout cable connector
The KVM breakout cable includes VGA connector, serial port
for
connector, and USB 3.0 (5 Gbps) / 2.0 connector. XCC mobile
management is supported by USB connector on the KVM breakout
cable.
12
Pull-out information tab with Lenovo XClarity Controller network
access label. See
XClarity Controller" on page 25
6
M.2 drive backplane
7
PCIe 5.0 x16 slot 2 or drive bay 2/3
See "Hardware replacement procedures" in User Guide
or Hardware Replacement Guide for for component
replacement.
8
PCIe 5.0 x16 slot 1 or drive bay 0/1
See "Hardware replacement procedures" in User Guide
or Hardware Replacement Guide for for component
replacement.
9
Front cam handle
"Identify the solution and access the Lenovo
for more information.