Windows Xp Driver Software; Installing The Driver Software; Windows 98 Driver Software - NETGEAR GA302T Reference Manual

CHAPTER 3: WINDOWS XP DRIVER SOFTWARE
This chapter provides information about the Microsoft Windows XP driver software.
This chapter also describes how to:
• Install the driver software in the Windows XP environment
• Move the card to a different slot
• Remove the driver software
Note: The GA302T Copper Gigabit Adapter must be physically installed in your
server or workstation prior to installing the driver software. See Chapter 2
"Hardware Installation" for details.

Installing the Driver Software

When the Windows XP system first boots up after installing a new hardware device,
such as a GA302T Copper Gigabit Adapter, the system automatically detects the new
hardware and prompts you to install the driver software for the device.
A network driver must be installed before the GA302T Copper Gigabit Adapter can
be used with your Windows XP system. You must have Network Administrator
privileges to install the driver software.

Windows XP driver software

3-1