Table of Contents
Advertisement
Table 2-2. GA302T LEDs
Label
Activity
DATA
Blinking
On
Off
1000
On
Off
100
On
Off
10
On
Off
Preparing to Install Your GA302T Copper Gigabit Adapter
Follow the instructions provided in this section for installing the GA302T Copper
Gigabit Adapter in your server or workstation. For additional information about per-
forming these tasks on your particular system, refer to the manuals
included with your system hardware.
Before installing your Gigabit Adapter:
1. Make sure that your system meets the hardware and software requirements
provided in Table 2-1.
2. Make sure that your system uses the latest BIOS.
3. Turn off the power to your PC.
If you are running Windows, close all applications and click Start from the
desktop menu, select Shut Down, and then select Shut down the computer.
hardware installation
Description
Brief bursts of data detected on the port
Streams of data detected on the port
No data detected on the port
Good 1000 Mbps Gigabit Ethernet link
No 1000 Mbps link; possible link at different speed, possible bad cable,
bad connector, or configuration mismatch
Good 100 Mbps Fast Ethernet link
No 100 Mbps link; possible link at different speed, possible bad cable,
bad connector, or configuration mismatch
Good 10 Mbps Ethernet link
No 10 Mbps link; possible link at different speed, possible bad cable,
bad connector, or configuration mismatch
2-6
Advertisement
Table of Contents
Troubleshooting
