Change Of Test Print Menu - Roland LEF2-200 Product Manual



Change of test print menu


Change of test print position

After the test print is performed, the position for the next test print can be changed.
Change printing position when test print (dot drop-out check) is printed continuously
・If [NONE] is selected, test print is printed at the lower right of printing area. (Same as the second time)
・If [FEED] is selected, test print is printed in the feeding (vertical) direction. If print goes to the limit of the feeding direction, the
printing starts the next line.
・If [SCAN] is selected, test print is printed in the scan (horizontal) direction. If print goes to the limit of the scan direction, the
printing stars the next line.
・Range: NONE/FEED/SCAN
・Initial value: NONE

Test print 2 added

Test print 2 has been added for checking WH test print easier.

With test print 2, black printing is performed and
then white printing is performed over that.
Panel menu sample
SUB MENU
TEST PRINT POS
TEST PRINT POS
SCAN >FEED
12. Maintenance
Confidential
Test print 2 (CMYKPrW)
60/64