Roland LEF2-200 Product Manual page 25


White color density

White ink cannot reach enough density unless the cartridge is shaken properly.
The following are described on User's Manual (First Step Guide, Master Guide and White & Gloss ink

Guide).
For Installation
Shake all cartridges 50 times (about 15
seconds) prior to installing.
The precipitation of the ingredients in the ink
disables printing in normal color. To allow the
ingredients to be mixed well, greatly shake the
ink cartridges from side to side using 5 cm
length as a guide.
For Daily Use
Remove the white ink cartridge, shake it 50 times
(about 15 seconds) then reinsert it.
Beware!
The ingredients in white ink tend to settle and the
precipitation of the ingredients in the ink disables
printing in normal color. The precipitation of the
ingredients in the ink disables printing in normal
color. To allow the ingredients to be mixed well,
greatly shake the ink cartridges from side to side
using 5 cm length as a guide. Without these
steps can cause the settled material to harden,
resulting in malfunction or other problems.
2. Printing Theory
Confidential
Ink filling after shaking 5 times
Ink filling after shaking 50 times
24/64