Table of Contents
Advertisement
3.
Open the latches and tighten the shipping screws, if necessary.
1
4.
Connect peripheral devices to the server.
WARNING: To reduce the risk of electric shock, fire, or damage to the equipment, do not plug telephone or
telecommunications connectors into RJ-45 connectors.
5.
If the server does not use a hot-plug power supply, do the following:
To prevent the accidental disconnection of the power cord when sliding the server into and from the rack, secure the
power cord through the strain relief clip:
a. If the clip is positioned too close to the power cord and blocks the power cord plug connection, slide the clip
backward.
b. Connect the power cord to the server.
c. Press the top part of the clip, and then pull the clip open.
10
Setup and install
1
2
2
Advertisement
Table of Contents
