How To Set Up And Test Basic Wireless Connectivity - NETGEAR RangeMax WNR834B User Manual

A login window like the one shown below opens:
Figure 1-12
Enter the user name and password. The wireless router will display its home page.
When the wireless router is connected to the Internet, click the Knowledge Base or the
Documentation link under the Web Support menu to view support information or the
documentation for the wireless router.
If you do not click Logout, the wireless router will wait 5 minutes after there is no activity before it
automatically logs you out.

How to Set Up and Test Basic Wireless Connectivity

Follow the instructions below to set up and test basic wireless connectivity. Once you have
established basic wireless connectivity, you can enable security settings appropriate to your needs.
1. Log in to the router at http://www.routerlogin.net with its default user name of admin and
default password of password, or using whatever LAN address and password you have set up.
2. Click the Wireless Settings link in the main menu of the router.
3. Note that the default SSID is NETGEAR.
Note: The SSID of any wireless adapters must match the SSID you configure in the
router. If they do not match, you will not get a wireless connection.
4. Set the Region. Select the region in which the wireless interface will operate.
Connecting the Router to the Internet
v1.0, 2006-03
Wireless Router Setup Manual
1-11