Case 1 How to Coat a Part of the Paper Using the UFR II Printer Driver
This section describes how to coat a part of the paper using the UFR II
printer driver from your computer.
In this case, the following procedure describes how to superimpose
multiple clear images of different numbers onto multiple pages of
originals.
■ Finished Sample
■ Material Requirements
Multiple Pages of Image Forms
CHAPTER 1
CHAPTER 1
CHAPTER 2
CHAPTER 2
Multiple Pages of Originals
Back
Previous Page
■ Workflow
1-1 Create the image forms.
1-2 Store the image forms.
1-3 Load the paper.
1-4 Superimpose the image forms onto the originals.
NOTE
• Paper Drawer 1 is used as the paper source in this example.
• The optional Color UFR II/PCL/PS Printer Kit is used to print the image form
in this example.
Case 1 How to Coat a Part of the Paper Using the UFR II Printer Driver
Next Page
Search
K2-2