10
Press [Start Coating].
Copying starts, and the preprinted paper is coated and stapled in the
top-left corner.
CHAPTER 1
CHAPTER 1
CHAPTER 2
CHAPTER 2
Back
Previous Page
3-3 Adjusting the Clear Toner Density
If you want to change the amount of clear toner deposited on the
preprinted paper after checking the print results, adjust the clear toner
density from the Additional Functions screen.
The following procedure describes how to decrease the clear toner
density.
1
(Additional Functions) ➞ [System Settings].
Press
2
Press [Device Management Settings].
Case 3 How to Coat the Full Surface of Preprinted Paper
Next Page
Search
K2-15