La Crosse Technology 328-2314 Instructional Manual page 6

Weather Station
1. Insert the 5.0 volt AC adapter into the back of the weather station.
2. Insert 3 AAA batteries into the weather station (optional).
3. Keep both sensors and the weather station together for 15 minutes
to lock in the sensor signals.
4. (Optional)-Spin the wind cups to simulate wind speed. Take the
Multi-sensor to the sink and slowly drip water into the rain
bucket to simulate rain.
5. After 15 minutes, follow the mounting instructions for proper
placement of each sensor.
ALERTS
Note: Your weather station should have readings in all sections.
Wind and Rain will show 0's (connected) until wind or rain
occur or are simulated.
Page | 5
-
W/CHILL TEMP
www.lacrossetechnology.com/support
+
SET
RAIN WIND LIGHT
328-2314