Features - NETGEAR ProSafe GSM7312 Hardware Installation Manual

Features

The following list identifies the key features of the NETGEAR Model GSM7312 Managed Layer 3 Gigabit
Ethernet Switch.
•
Twelve 10/100/1000 Mbps auto sensing Gigabit Ethernet TP ports
•
Twelve SFP modules combo (shared with TP) with GTP for a variety of fiber connections
•
Full compatibility with IEEE standards:
o IEEE 802.3i, (10BASE-T)
o IEEE 802.3u (100BASE-TX)
o IEEE 802.3ab (1000BASE-T)
o IEEE 802.3z (1000BASE-X)
o IEEE 802.3x (full-duplex flow control)
•
Full Layer 2 switch management including:
o SNMP V3
o RMON (groups 1,2,3 and 9)
o IEEE 802.1Q (up to 512 Static VLAN groups)
o IEEE 802.1D (Spanning Tree)
o IEEE 802.1w (rapid spanning tree)
o IEEE 802.1s (multiple spanning tree)
o IEEE802.3ad Link Aggregation (LACP)
o Port Mirroring
o DHCP/BootP Client for automatic IP address setup
o Configuration file export/import
o TFTP firmware upgrade
•
Layer 3 switch management including:
o RIP I, II
o OSPF V2
o IP Routing
•
Security to better safeguard your network:
o Password Access Control
o IP Access Control List
o RADIUS Client Support
o IEEE 802.1x Port Access Control
•
Traffic management to better manage traffic flows through your switch:
o IEEE 802.1p (Class of Service)
o DiffServ traffic prioritization
o Broadcast Storm Control
o IGMP snooping
o Half-duplex back-pressure control
o Full-duplex IEEE 802.3x pause frame flow control
•
Multiple interfaces to access the management features:
o Browser-based Graphical User Interface (GUI)
o Command Line Interface (CLI)
Page 6 of 22