Appendix C: Default Settings - NETGEAR ProSafe GSM7312 Hardware Installation Manual

APPENDIX C: DEFAULT SETTINGS

This appendix provides the default settings for the NETGEAR Model GSM7312 Managed Layer 3 Gigabit
Ethernet Switch.
Feature
Port Speed
Port Duplex
Flow Control (half duplex)
Flow Control (full duplex)
Broadcast Storm Control
Gigabit port type
IP Configuration
Password protection
User Name
Password
VLAN
Port Access Control
IP Multicast Filtering
Spanning Tree Protocol
Traffic Prioritization
802.1p
DiffServe
MAC address aging
SNMP Community
Routing
RIP
OSPF
Router Discovery
ACL
DiffServ
GSM7312 Default Setting
Auto negotiation
Auto negotiation
Enabled
Enabled
Enabled
Auto detect
DHCP enabled
Disabled
Admin
(none)
All ports belong to default VLAN (VLAN 1) as untagged ports
Disabled
Disabled
Enabled (IEEE 802.1s)
Optimized for flow control, all ports normal priority
0 - 31 normal priority, 32 – 63 high priority
300 seconds
Public (you must add application to Host table before switch
will respond to SNMP requests)
Disable
Disabled
Disabled
Disabled
None
None
Page 22 of 22