Appendix C: Technical Specifications - NETGEAR ProSafe FS726T Operating Instructions Manual

APPENDIX C: TECHNICAL SPECIFICATIONS

This appendix provides technical specifications for the NETGEAR ProSafe FS726T Smart Switch.
Network Protocol and Standards Compatibility
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000Base-X
IEEE 802.3x flow control
Management
IEEE 802.1Q Static VLAN (Up to 24 ranging from 2 to 4K)
Port-based VLAN (Up to 24)
IEEE 802.1p Class of Service (CoS)
Port-based QoS (options High/Normal)
Port Trunking - Manual as per IEEE802.3ad Link Aggregation
Interface
24 RJ-45 connectors for 10BASE-T, 100BASE-TX (Auto Uplink™ on all ports)
2 RJ-45 connectors for 10BASE-T, 100BASE-TX and 1000BASE-T (Auto Uplink™ on all ports)
1 SFP GBIC module bay
LEDs
Per port (Gigabit): Link/Activity, Speed
Per device: Power
Performance Specifications
Forwarding modes: Store-and-forward
Bandwidth: 8.8 Gbps
Network latency: Less than 20 microseconds for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission
Buffer memory: 256 KB embedded memory per unit
Address database size: 8,000 media access control (MAC) addresses per system
Mean Time Between Failure (MTBF):305,056 hours (~ 34 years)
Power Supply
Power Consumption: 15 W maximum
100-240VAC/50-60 Hz universal input
Physical Specifications
Dimensions (H x W x D): 1.6 x 17.3 x 8.1 in. (43 x 440 x 205 mm)
Weight: 5.5 lbs. (2.5 kg)
Environmental Specifications
Operating temperature: 0 to 40°C (32 to 104°F)
Storage temperature: -20 to 70°C (28 to 158°F)
Operating humidity: 90% maximum relative humidity, non-condensing
Storage humidity: 95% maximum relative humidity, non-condensing
Operating altitude: 3,000 m (10,000 ft) maximum
Storage altitude: 3,000 m (10,000 ft) maximum
Electromagnetic Emissions
CE mark, commercial
FCC Part 15 Class A
VCCI Class A
C-Tick
Electromagnetic Immunity
EN 55022 (CISPR 22), Class A
Safety
CE mark, commercial
UL listed (UL 1950) / cUL IEC950 / EN60950
Page 18 of 19