General Safety Information; General Installation - Coleman 9995A Series Instructions For Use Manual

Event grill
Hide thumbs Also See for 9995A Series:
Table of Contents

Advertisement

General Safety
Information
cont.
4
5

General Installation

• Installation must conform with local codes or, in the absence of local
codes, with either the National Fuel Gas Code, ANSI Z223.1 (USA),
CAN/CGA-B149.1, Natural Gas and Propane Installation Code
(Canada).
To check local codes, see your local L.P. gas dealer or natural gas
company listed in the Yellow Pages for recommended installation pro-
cedures and regulations.
WARNING
This appliance is not to be installed in or on a recreational vehicle
and/or boat.
Follow these safety rules before each use:
1. Always maintain a minimum clearance of 24 inches or
all sides of grill to any combustible construction. (Fig. 9)
2. Never locate grill under an unprotected combustible material or
overhang which is connected to a building. (Fig. 9a)
3. Do not obstruct the flow of combustion and ventilation air.
4. Keep the ventilation opening(s) of the cylinder enclosure free and
clear from debris.
5. Grill should be level and not facing directly into wind.
WARNING
Keep any electrical supply cord away from any heated surface. During
assembly of grill and when attaching or replacing the L.P. gas cylinder,
insure that the gas supply hose is free of kinks and is at least 3" away
from hot surfaces such as the grill housing.
1
24"
6
60
cm from
2
7
8
9
Clear
24"
(60cm)
24"
(60cm)
9a
3
24"
(60cm)
24"
(60cm)
REPRESENTATIVE
ILLUSTRATION
3

Advertisement

Table of Contents
loading

Table of Contents