Special Unpacking Instructions - 9993 Series - Coleman 9993 Series Assembly Manual

Read All the Unpacking Instructions before
starting this section!
1. Cut the shipping straps and remove the top of the cardboard container.
2. Remove the door assemblies that are located in the protective packing
on each end of the grill. Set the doors aside for a later assembly step.
3. Lift the cardboard container sides from the shipping base. Additional
boxes of parts are located inside the grill cart (Fig. 7).
Fig. 7
D
4. Remove boxes "A and "C" out the front door opening (Fig. 8).
Fig. 8

Special Unpacking Instructions - 9993 Series

A
B
C
B
C
5. Remove two screws at location "E" with a "Phillips" screwdriver (Fig. 9).
Fig. 9
E
6. Remove the left side panel and set aside for a later assembly
step (Fig. 10).
Fig. 10
7. Remove the remaining large boxes and the grill hood (Fig. 11).
Fig. 11
8. Replace the left side panel and tighten the two screws (Fig. 12).
Fig. 12
7
E