Power Plant Checks - Nortel DMS-100 Series Maintenance Manual

3–20 Power system maintenance

3.4 Power plant checks

Power plant checks consists of the following:
The power plant checks can be performed in any order and on a selective
basis. While performing these checks, fill in appropriate maintenance
records (Figures 3–1 through 3–13), as well as the maintenance action
record (Figure 3–14).
Each check describes an item and the normal state or condition for the
check. If an item being checked is found to be abnormal, record the
following information in the maintenance action record:
Instructions for completing the remaining forms, as needed, are provided in
the following paragraphs.
297-1001-350 Standard 02.02 August 1997
power plant safety checks
power plant fuses
charging equipment checks
battery equipment checks
standby power system checks
standby engine-alternator checks
standby power system exercise
miscellaneous checks
sequential number in ITEM field for future reference
power plant subsystem affected in SUBSYSTEM field:
— charging plant
— battery plant
— standby power system.
description of the problem in PROBLEM field
description of the corrective action recommended in the ACTION
REQUIRED field
name of the person or group responsible for performing the corrective
action.