Siemens SIMATIC 317TF-2 DP Getting Started page 22

Configuration
4.2 Configuring the F-DI signal module
Step Activity
6 Assign the parameters of the channels used as shown in the "Configuration of the input channels" table:
Keep the default settings for channels 0 and 12, 1 and 13, 2 and 14:
For channels 3 and 15, select the parameters as shown in the following figure:
22
CPU 317TF-2 DP: Controlling a SINAMICS S120 with Safety Functions
Getting Started, 07/2010, A5E02982990-01