LAB 7A: Security on UC500 and SR520
2 Go to Setup > Device Setup Wizard.
3 From the Select a device menu, select SR520 and click Next.
4 Click Next until device connectivity is verified. It might take 2-3 minutes to verify the device
connectivity.
5 Enter your Cisco SR520 administrator username and password. The default username is admin. The
default password is admin.
6 Verify that the Synchronize with PC checkbox is checked. This synchronizes the time and date
settings on the UC500 with your PC and click Next.
Cisco Unified Communications Technical Training
Page 83 of 171