NW-A35/A35HN/A36HN/A37HN
2-6.
BATTERY WIRE
bottom side
front side
2 Remove the solder. [black]
Note: Perform insulation such as
taping the battery wire ends.
5 Remove the solder. [red]
Note: Perform insulation such as
taping the battery wire ends.
18
1 Draw out the three
battery wires.
three claws
top side
1 battery wire
[red]
3 sheet (ENT)
three claws
6 Push in the battery wire [white]
while pulling in the direction of
the arrow.
4 Remove the solder. [white]
Note: Perform insulation such as
taping the battery wire ends.
MAIN board
2 battery wire
[white]
4 battery wire
5 Push in the battery wire [red]
[black]
while pulling in the direction of
the arrow.
7 Push in the battery wire [black]
while pulling in the direction of
the arrow.
3 sheet (ENT)
guide line
three claws
three claws