Installation
Agilent MP-AES Instrument Overview
Figure 1. Front of the MP-AES instrument
Where:
1. Power status LED
2. Plasma Enable button/
status LED
3. Optional AVS 4 Switching
Valve accessory
4. Nebulizer gas supply
If the Plasma Enable button is used to extinguish the plasma, you will need to
NOTE
reset the Plasma Enable button to the 'Enable' (pushed in) position before the
plasma can be re-ignited.
26
1
2
3
4
5
Agilent Microwave Plasma Atomic Emission Spectrometers User's Guide
5. Peristaltic pump
6. Pre-optics window
access door
7. Plasma viewing port
8. Torch loader handle
9. Torch
10. Torch clamp for spray
chamber and torch
11. Spray chamber
12. Nebulizer
6
7
8
9
10
11
12