Summary of Contents for Agilent Technologies 490 Micro GC
Page 1
(septum nut and luerlock) at the front of the Agilent 490 Micro GC. When the Agilent 490 Micro GC is equipped with a standard unheated front inlet, an N O T E additional field upgrade kit for the sample inlet box is required. The part number for a dual cabinet Agilent Micro GC is CP490202, for the quad cabinet Agilent Micro GC use part number CP190203.
Page 2
Agilent 490 Micro GC Table 1 Parts list for the four kit types Kit types available CP490204 CP490205 CP490206 CP490207 Description and Part number Septum Luerlock Septum + Rear Luerlock + Rear Bracket with pressure relief valve CP742849/CP742987 Bracket with pressure relief valve + ball-valve...
Agilent 490 Micro GC Mounting the Sample-in at the Front of the Agilent 490 Micro GC Remove the side and front panels of the Agilent 490 Micro GC. Make a hole in the preferred place on the front panel next to Sample 1. See...
Page 4
Agilent 490 Micro GC If using the Injection-Port CP490204 or CP490206 use the parts listed in Figure 1. CP742983 2. CP72472 3. CP86757 4. CP739952 Figure 3 Sample bracket parts for CP490204 or CP490206 If using the Injection-Port CP490205 or CP490207 use the parts listed in Figure 1.
Page 5
Sample bracket parts for CP490205 or CP490207 The diagrams below show the differences for the different field kits (Figure 6 Figure 7). Plumb the tubing according to these diagrams and Figure Figure 6 Diagram of unheated sample-in-Agilent 490 Micro GC for CP490204 or CP490205 Installation Instructions...
Page 6
Agilent 490 Micro GC Figure 7 Diagram of unheated sample-in-Agilent 490 Micro GC for CP490206 or CP490207 Figure 8 Diagram of unheated sample-in-Agilent 490 Micro GC Installation Instructions...
Page 7
Agilent 490 Micro GC Make an 18 mm incision in the upper insulation plate as seen in Figure 9 and install it in the Sample-Inlet-Box, see Figure 10 Figure 18 mm Figure 9 Upper insulation plate Figure 10 Sample-Inlet-Box without insulation Figure 11 Sample-Inlet-Box with insulation Reinstall the side panel.