Control Panel; Description And Functions; Setting Temperature - KAUKAN KAC-1.5 Instruction Handbook Manual

CONTROL PANEL

4.1 Description and Functions:

a) (DISPLAY):
1.) To show the value of electrical box temperature or setting temperature.
2.)
To show the parameter item and value.
(▲) button:
b)
1.) To enter the temperature setting mode (press and hold for 3 seconds, display shows "888")
2.) To input the setting value incrementally.
(▼) button:
c)
1.) To enter the temperature setting mode (press and hold for 3 seconds, display shows "888")
2.) To input the setting value decrementally.
d) (SET) botton:
1.) To enter the temperature setting mode (press and hold for 3 seconds).
2.) To store the setting value (temperature or parameter).
e) ( ) indicator lamp (blue):
Light is on when compressor is working.

4.2 Setting temperature

After setting the temperature, it takes eight seconds for the control unit to confirm and activate the setting.
1.) Turn on the main power, the display shows "PON" and flashes 3 times, then the air condition starts
working.
Press (SET) and hold for 3 seconds, the display will show "888" and flash 3 times.
2.)
3.) Press (▲) or (▼), then display shows "ts".
4.) Pressing (SET) again to go into the setting mode.
5.) Press (▲) or (▼) to set the temperature value.
6.) After setting the target temperature, press (SET) to store the modified temperature and return to the normal
operation of instruction.
a
e
b
c d
4