Front Plate (L) Block (L-Ch) - Sony WH-XB900N Service Manual

WH-XB900N

2-10. FRONT PLATE (L) BLOCK (L-ch)

– L-ch –
3 Remove two solders
of the driver wire.
15
2 Remove the front plate (L) block
in the direction of the arrow.
Install driver wire as shown figure below.
[natural]
driver wire [green]
Note: The front plate (L) block is disassembly prohibition.
Also, the L MAIN board, L NFC board, electret cap microphone, front plate (L) block and
front plate (R) block have proper combinations and cannot be repaired and replaced individually.
If the front plate (L) block malfunctions, replace the SVX headphone assy.
1 five screws
(2.0 5.0 mm)
L MAIN board
4 front plate (L) block
(See Note)
Sony CONFIDENTIAL
For Authorized Servicer
SYS SET