R Sub Board-1 (R-Ch) - Sony WH-XB900N Service Manual

WH-XB900N
2-5.

R SUB BOARD-1 (R-ch)

• Continued on 2-6 (page 12).
– –
3 Draw the relay cable
out of the groove.
(See Fig. D)
groove
11
1 Remove four solders
of the relay cable.
(See Fig. B)
2 Remove five solders
of the relay cable.
(See Fig. C)
groove
3 Draw the relay cable
out of the groove.
(See Fig. D)
Attach in order from 1 to 3.
1 Press the relay cable in the two grooves.
Note: Arrange so that the relay cable does not
exceed the guide line.
groove
battery
holder
relay cable
2 Soldering the five wires.
[red/blue]
[white]
R SUB
board
relay cable
3 Soldering the four wires.
[natural/red]
[black]
R SUB
board
relay cable
Sony CONFIDENTIAL
For Authorized Servicer
groove
guide line
[natural/green]
[natural]
[green]
[red]
[blue]
SYS SET