Hoover HV-LFL10 Quick Start Manual

Hoover's quick
& snappy start
up guide.
Let's get your washing
machine up and running!
Welcome to your new Hoover washing machine! We hope that this product brings you many years of
enjoyment.
Before installing the washing machine, you must remove the transport bolts from the back of the housing
and cover the holes with the transport hole caps provided.
This washing machine must be installed by a competent person. Installation involves removing the transport
bolts, leveling the machine, connecting it to your cold water supply and installing the drain hose.
NOTE: Make sure the washing machine is properly and securely installed. Before using the washing machine
for washing clothes, run a complete washing cycle without clothes using the drum clean program.
For detailed installation instructions, please consult the supplied instruction manual, which also has
comprehensive usage instructions and important safety advice.
Before each wash
• Before washing a load, plug in the machine (Fig. 1a) and
open your water tap (Fig. 1b).
• Load your washing into the machine—page 22 in the
instruction manual has useful hints to help you with this
(Fig. 1c).
• Close the door and add detergent to the drawer—find all
the details on page 21 in the instruction manual (Fig. 1d).
Instructions
• Rotate the program dial to switch on the machine,
select a program and switch the machine off at the
end.
• The display screen (Fig. 2) shows the settings, time
remaining, options, codes, etc.
• Use the buttons to set a delay start time or an
extra rinse, or adjust the spin speed and water
temperature.
• Press the Start/Pause button to start a wash
program or to pause it.
• Press and hold a button, as instructed on the panel,
to activate the child lock, or to mute the alert sound.
10 kg Front load
Washing machine
Model #:
Version #:
After Sales Support
1A
1C
2
HV-LFL10
V1.0
1300 886 649
1B
1D