Product Description - Panasonic ET-PKL100S Installation Instructions Manual

Ceiling mount bracket (for low ceilings)
Table of Contents

Advertisement

Product description

This is a ceiling mount bracket for installing projectors.
■ Applicable ceiling mount brackets
ET-PKL420B / ET-PKL430B
■ Structural components
Parts name
Attachment plate
Adjustable bracket
unit
Bolts
The M6 indications in the installation instructions refer to captive washer hex head bolts.
■ The user must also obtain the following parts. (sold separately)
Installation work
Installing the at-
tachment plate to
the ceiling
Installation of ceil-
ing mount bracket
drop-prevention
kit
Be sure to use M8 or
z Store small parts in an appropriate manner, and keep them away from young children.
z Screw tightening torques: M4: 1.25 ± 0.2 N • m, M6: 4 ± 0.5 N • m, M8 or
z Use a torque screwdriver or torque wrench when tightening the bolts and nuts. Do not use electric screwdrivers
or impact screwdrivers.
Attention
z Dispose of the packaging materials properly after taking the product out of it.
4 - ENGLISH
Form (number of parts)
Hex head bolt, captive washer (M6 × 12)
Installing to a
Ceiling mount bolt (×4), Hex nut (×16), Flat washer (×16)
wooden structure
Spring washer (×8)
Installing to a
Ceiling mount bolt (× 4), Hex nut (× 12), Flat washer (× 12),
concrete structure
Spring washer (× 8), Anchoring nut or curled plug (× 4)
Installing to a
Ceiling mount bolt (× 1), Hex nut (× 2), Flat washer (× 1),
wooden structure
Spring washer (× 1)
Installing to a
Anchoring nut or curled plug (x1),
concrete structure
Spring washer (x1), Hex head bolt (x1)
5
/
" suspension bolts, nuts, flat washers, spring washers and anchor nuts.
16
The attachment plate is attached
to the ceiling via four ceiling
× 1
mount bolts. Installation methods
are different for concrete and
wooden ceilings.
It also allows horizontal swing
angle adjustment.
This is used to connect the at-
tachment plate with the projector
mount bracket.
× 1
It has a function which allows ad-
justment of the forward and back
tilt.
These are used to secure the
× 4
adjustable bracket unit to the
projector mount bracket.
Required parts
5
/
": 10 ± 1 N • m.
16
Applications
page
6
6
10
10

Advertisement

Table of Contents
loading

Table of Contents