Product Description; Finished Assembly Diagram - Panasonic ET-PFD510 Operating Instructions Manual

Product description

This frame is exclusively for the installation of dual projectors.
■ Structural components
Parts name
Frame
Screws and metal fittings
z Store small parts in an appropriate manner, and keep them away from young children.
z The tightening torque for the screws should be 4 ±0.5 N · m for the M6 screws and 20 ±1 N · m for the M10 screws.
z Use a torque driver, torque wrench or similar tool when tightening the bolts and nuts. Do not use electric
screwdrivers or impact screwdrivers.
Note
z For dual stack installations, prepare a wrench and other tools in addition to the above.

Finished assembly diagram

4 - ENGLISH
Form (number of parts)
Hexagonal head bolt with washers (M6 × 30) ............... × 6
Hex nuts (M10) ...................................................... × 8
Flat washers (M10) ............................................. × 16
Bent washers (M10) .......................................... × 16
Spring washers (M10) .......................................... × 8
Adjustment nuts (M10) .......................................... × 4
Hex head bolts (M10 × 140, for vertical fixing) ............ × 4
Ú Example showing one projector stacked on top of
another projector.
Another separate frame is required when stacking two
frame together.
× 1
Upper projector
Lower projector