Fluke MultiFiber Pro Product Information page 5

To prevent possible fire, electric shock, or personal injury:

Read all safety information before you use the Product.

Carefully read all instructions.

Do not open the case. You cannot repair or replace
parts in the case.

Do not modify the Product.

Use only replacement parts that are approved by Fluke
Networks.

Do not use the Product around explosive gas, vapor, or
in damp or wet environments.

Use this Product indoors only.

Use the Product only as specified, or the protection
supplied by the Product can be compromised.

Do not use and disable the Product if it is damaged.

Do not use the Product if it operates incorrectly.

Batteries contain hazardous chemicals that can cause
burns or explode. If exposure to chemicals occurs, clean
with water and get medical aid.

Remove the batteries if the Product is not used for an
extended period of time, or if stored in temperatures
above 50 °C. If the batteries are not removed, battery
leakage can damage the Product.

The battery door must be closed and locked before you
operate the Product.

Repair the Product before use if the battery leaks.

Replace the batteries when the low battery indicator
shows to prevent incorrect measurements.

Be sure that the battery polarity is correct to prevent
battery leakage.

Do not disassemble or crush battery cells and battery
packs.
W
Warning
Safety Information
X
3