Functions button
Setting up the "Alarm key" function
Trigger an action using the Functions button.
Settings
Activation:
On
When the earpiece or handsfree function is used for the call initiated:
Via
Select
Shorter and longer pressing of the Functions button can cause different actions to be trig-
gered. Configure one after the other the settings for short and long presses.
Select
Short key press / Long key press
Enter the phone number to which the alarm is forwarded:
Call to
Specify a delay time between pressing of the button and triggering of the alarm:
Alarm delay
Specify the alarm melody to be played on the handset after the Functions button is pressed:
Melody
Set the volume for the melody played:
Volume
Save the settings:
When the Functions button, configured as an Alarm button, is pressed
•
connections currently established for the base are ended
•
incoming calls are rejected
•
the handset plays the alarm melody over the speaker (if configured)
•
an alarm call is made to the number specified
The phone number routed to the alarm system can also be assigned as a quick dial
number on the Digits or a Display button.
Setting up the "System action" function
The function is supported by the base and is configured for the handset.
With this function you are able to select a function configured on the base as a system action. In
this case, the Function key only works as a button in line with the conditions defined in the
configuration. What is triggered by pressing the alarm button depends on the configuration on
the alarm server.
Settings
Activation:
On
36
OK
Display + Keypad
Function:
Alarm key
Earphone or Handsfree
Enter the number or
Select the delay time
Select the melody
Select the volume
Save
OK
Display + Keypad
Function:
System action
OK
Select On or Off each time
select it from the directory
OK
Feature Key
OK
Feature Key
OK