Gigaset S700 H PRO Manual page 10

Handset
Setting the display language
Press the control key
on the display, e.g. English
You can also change the display language later on in the Settings
menu.
Registering a handset
Register the handset with the Gigaset N870 IP PRO.
Registration must be initiated both on the Gigaset N870 IP PRO and on the handset.
For this, the handset must be within range of the Gigaset N870 IP PRO.
On the Gigaset N870 IP PRO
Start the registration process
Information for this:
User guide "N870 IP PRO - Installation, configuration and operation"
or: Contact the administrator of the DECT network.
On the handset
You require the 4-digit system PIN (registration code) generated on the Gigaset N870 IP PRO.
If the handset is not yet registered with a base:
Register . . . A search is performed for a base ready for registration
PIN OK
If the handset is already registered with a base:
Settings
A search is performed for a base ready for registration
Once registration is complete, the handset returns to idle mode. Shown on the idle display is the
name set on the Gigaset N870 IP PRO for the handset (user name or display name). If it is not,
repeat the procedure.
Your phone is now ready for use.
The handset can be registered with up to four base stations. Changing the base:
OK
Some Gigaset bases and bases/routers from third party manufacturers might not be
fully compatible with the handset and not all functions are displayed correctly. In such
cases, use menu option Basic Registration. This guarantees correct displays on the
handset, but can entail restrictions for some functions.
10
until the language required is selected
press the display key OK
OK Registration
Settings OK
select the base OK
Deutsch
English
Francais
OK Register Handset
enter the system PIN
Registration OK
enter the system
OK . . .
OK
Select Base