Gigaset S700 H PRO Manual page 23

Adjust the microphone sensitivity
Adjust the microphone sensitivity for the receiver or wired headset during a call.
press and hold
Changing without saving means the change only applies for the current call.
Permanent setting of the microphone sensitivity when the phone is idle:
press and hold
or
Settings
select Earpiece / Corded headset
Set the acoustic profile to loud surroundings:
Press and hold the
Network services
Network services are dependent on the phone system and network provider.
To activate/deactivate the features, a code is sent to the telephone network.
Deactivating Calling Line Identification for the next call
By default for an outgoing call, the phone number is sent and can be shown with the caller on
the display (CLIP = CLI Presentation). When the caller's number is withheld, it is not shown on the
called party's display. The call is made anonymously.
Select Services
number Dial . . . The connection is established without CLI
Call divert
When call divert is enabled, incoming calls are forwarded to another connection.
Select Services
is to apply OK
All Calls:
No Answer:
When Busy:
Enable/disable:
Enter the number for call divert:
Enable:
set the required sensitivity
select Earpiece / Corded headset
OK Audio Settings
button set the sensitivity
OK
OK
Calls are forwarded immediately.
Calls are diverted if no one accepts the call within several rings.
Calls are diverted if the line is busy.
Status: select On or Off
To Phone Number
Send
Save
OK
set the sensitivity Save
Save
Next Call anon. OK
Call Divert OK
enter the number
Making calls
set the sensitivity Save
Mic Sensitivity OK
enter the
select when call divert
23