Phone Lock; Bar Calls - NEC N343i User Manual

Change PINs
The PIN will be requested most of the times when the phone is switched on. This feature can be deactivated, at the risk of unauthorized usage of your
phone. Some service providers do not permit the deactivation of this control.
You can set up your phone to require your
incoming calls. If you entered your
service provider for a
PUK code
Your phone supports advanced features (e.g. FDN) that may require a PIN2 code to be entered before they can be accessed or
modified.
To activate PIN
• From the main menu, select
will have to key in a
PIN code
PIN/PIN2/Phone code change
• From the main menu, select
• Select either
Change PIN
• Key in the current code. You will be prompted to enter the new code when the correct current code is entered. Enter the new code again and
press Left Softkey to confirm the new code.
• A confirmation screen is displayed momentarily and the phone returns to
The PIN2 code is SIM card related and may only be available from your service provider.

Phone lock

The Phone lock menu allows you to lock your SIM card from unauthorized usage. If
correct PIN code is entered. To enable/disable
• From the main menu, select
• Highlight and press
Phone lock
been activated. You will have to key in a
The default setting of the Phone code is "0000".

Bar calls

This feature allows you to restrict the following type of calls made or received on your phone. You will need a 4-digit password provided by your service
provider to activate barring. You may have to register separately for each type of barring.
• All outgoing (All outgoing calls, except emergency numbers 112 and 999 will be barred)
• Outgoing international (International outgoing - Only calls within the home country can be made on the phone)
• Outgoing international except home (International outgoing without home country - International calls not permitted. However calls can still be
made to your home country when you're abroad)
• All incoming (All incoming calls will be barred, including the forwarding of the calls to the voice mail)
entered when the phone is switched on before the phone can be used and receive any
PIN code
incorrectly for more than three times (not necessarily in the same session), you will have to contact your
PIN code
to unblock your SIM card.
> . Highlight
Settings Security
for activation. A tick in the check box beside the option indicates that
> >
Settings Security Code
/ /
Change PIN2 Chg. phone code
, proceed as follows:
Phone lock
> .
Settings Security
Left Softkey to toggle
Phone lock
to activate Phone lock.
Phone code
and press Left Softkey
PIN activate
.
.
display menu.
Code
Phone lock
On/Off. A tick in the check box beside the option indicates that
to toggle PIN activate Enable/Disable. You
has been activated.
PIN activate
is On, SIM data can be accessed only when the
has
Phone lock
39