International Dialling Service; Scratchpad Number - NEC N343i User Manual

Nec n343i: user guide

Table of Contents

With Auto redial activated, your phone will redial a number up to 10 times if the first attempt is not successful. For procedures to activate Auto redial, see

"Auto redial" on page 38.

When a dialed number cannot be connected, a tone is heard and an alert message will be shown on the display. The phone returns to the standby screen

and the number will be automatically dialed again after a short delay. The phone will try to redial the number up to 10 times. Failure to connect a call might

be due to network problems or if the party you are calling is busy.

To end a redial attempt, press

Right

To redial the last number you have called, press

International dialling service

When you make an international call from any country, you must start by dialling a special international access code. Your phone has the facility to

prefix a + symbol to the numbers, so that you need not enter the access code for the country that you are calling from.

Entering international dialling codes

•

Hold down 0. A + character is displayed.

•

Key in the location code, area code, and phone number that you wish to call.

•

To select a location code, press

For example, the UK country code is always 44, no matter what country you are dialling from. A typical UK number of 0131 1234567 is entered as:

International access location code

Scratchpad number

Your phone has a scratchpad function that enables you to key in a telephone number even during a call and to dial it after the current call ended. This

scratchpad number can also be saved for future use.

Noting & calling a scratchpad number

•

During a call, key in the number using the keypad. The number is displayed on the display screen.

•

Press

key to end the current call. The number that was keyed in is still displayed.

•

Press

key to dial the number.

Storing a scratchpad number

•