To Switch To A Grouptalk; Other Possible Operations During A Call - NEC e808n Product Manual

To Switch to a Grouptalk (available in 3G mode only)
To
1 Switch to Grouptalk
2 Talk
3 End the call

Other Possible Operations During a Call

To
Use the Scratchpad
Adjust the earpiece volume
Add the caller to the contact list
Search the contact list
Record a Voice Note
Send DTMF
Put a call on hold
Making and Receiving Calls
Do This
(When there are two calls on-line: the current call and a held
call)
Press the SK2 (Submenu) key, and select Grouptalk.
Press the End key, or close the handset.
Note : When the stereo headset is plugged in, closing the
handset will not end the call.
Do This
If you input keypad characters during a call, the input
characters will remain displayed on the screen after the call is
finished. You can use this function as a screen scratchpad.
Press the Up or Down key, and on Earpiece Volume
displayed, use the Up or Down key to adjust the volume level.
Press the SK1 (Done) key when you finish adjusting.
While talking, press the SK2 (Submenu) key and select Add
to Contacts.
While talking, press and hold the Up key to search the category
list or the Down key to search the alphabetical list.
While talking, press the SK1 (Vc Note) key to record the
conversation. (20 seconds max.) (Refer to Voice Notes on
page 129 for details.)
You can send Dual Tone Multi Frequency (DTMF) signals
during a call. Just input the keypad character needed. You
cannot send DTMF during a video call.
While talking, press the SK2 (Submenu) key and select Hold.
The call will be put on hold. To retrieve the call, press the SK2
(Submenu) key and select End hold. You cannot put a call on
hold during a video call.
-17-