Selecting Alert Tone Type; Using The Phone On Two Networks - NEC DT 2000 Owner's Manual

2) Use MEM key to select Off,Min,Low,Mid or Max.
3) Press 1 to hear the ring tone.
4) Press CLR to exit and save selection
If you select Off, when a call is coming in, the display will
flash, the CALL message will appear and flash.

SELECTING ALERT TONE TYPE

The Alert Tone on your phone can be selected from four
different tone combinations.
1) Press FCN + 4.
2) Press 1.
3) Press MEM to select between the four different tone
combinations.
Note: You can listen to each tone combination by
pressing 1 again after the initial pressing of FCN + 4 + 1.
Make sure your ringer volume is up.
4) Press CLR to exit and save selection.

USING THE PHONE ON TWO NETWORKS

The phone's two number capability feature lets you subscribe
to both cellular services in your area or other areas, using a
different Number Assignment Module, referred to as a NAM,
for each network.
Note: You cannot change from one network to the other
during a call.
D
H B
FCN 4 _
Tone
Function
D H B
FCN 41
Alert Set
1
-24-