Electrical Installation
CAUTION! Single AC inlet can only support ten battery packs at most. If users connect more
than ten battery packs, plug more wall receptacle to avoid overload.
CAUTION! Do not disconnect the battery pack when UPS is in operation.
CAUTION! Do not connect the battery pack to itself.
CAUTION! Additional battery packs are to be connected in parallel connected, the voltage
maintains the same, yet the battery amp-hour capacity depends on the numbers of
battery packs in the set up.
CAUTION! For GROUND protection, plug AC power connectivity to wall receptacle with ground
line before using battery pack.
Step 1. Turn off the existing UPS system- Safely power off the UPS system and unplug it from
the wall receptacle.
Step 2. Connect the Battery Pack's output cord into the UPS's input port. Ensure the color coded
Battery Pack connector lines up correctly with the colors in the UPS socket.
One Battery Pack
BP48V45ART2U
RESET
10A
RESET
10A
AC INPUT
100~240V
(Change Only)
AC INPUT
100~240V
(Change Only)
BP48V75ART2U
Copyright © 2013 CyberPower Systems, Inc.
AC OUTPUT
AC OUTPUT
11