Connecting Your Vcr Or Laser Disc Player - NEC VT45 User Manual

Connecting Your VCR or Laser Disc Player

VCR/ Laser disc player
L
R
Audio equipment
Use common RCA cables (not provided) to connect your VCR, laser disc player or document camera to your projector.
To make these connections, simply:
1. Turn off the power to the projector and VCR, laser disc player or document camera.
2. Connect one end of your RCA cable to the video output connector on the back of your VCR or laser disc player, connect the other
end to the Video input on your projector. Use an audio cable (not supplied) to connect the audio from your VCR or laser disc player
to your audio equipment (if your VCR or laser disc player has this capability). Be careful to keep your right and left channel
connections correct for stereo sound.
3. Turn on the projector and the VCR or laser disc player.
NOTE: Refer to your VCR or laser disc player owner's manual for more information about your equipment's video output require-
ments.
NOTE: The VT45 is not compatible with video decoded outputs of ISS-6020 and ISS-6010.
NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via a
scan converter.
White
Red
L
R
White
Red
Audio cable
(not supplied)
S - V
I D E
V I D
E O
S-video cable
(not supplied)
A U
White
A U
Red
Document camera
Video cable (not supplied)
E–24
O
S - V
I D E
O
I N
A U
D I O
V I D
E O
L / M
I N
O N
I N
O
O U
T
R G
B O
R
I N
U T
N
L I
I N
D I O
N
R I R G
B I
N
D I O
V I D
E O
P C