Upgrade The Firmware - SonicWALL CSa 1000 Getting Started Manual

SonicWall recommends running the latest firmware on your Capture Security Appliance. Your appliance must be
registered and licensed in MySonicWall before you can update firmware on it.
To update firmware on your CSa:
1. Log into your CSa as an administrator.
2. Navigate to the System > Firmware Management page.
3. Select the desired version from the Target Version drop-down list.
4. Click the Click to Upgrade / Downgrade button.
5. In the Warning popup, click OK.

Upgrade the Firmware

Capture Security Appliance 1000 Getting Started Guide
11
22
Upgrade the Firmware