Hibernate Tab - Dell Inspiron 5000 Series Owner's Manual

— Shut down Windows and turn off the computer.
— No action (None).
To program these functions, click an option from the corresponding pull-down menu, and then click OK.
NOTE:If you are going to connect your computer to a port replicator, click None when you program the display-close option. This
setting ensures that your computer does not enter standby mode or hibernate mode when you close (lower) the display.

Hibernate Tab

The Hibernate tab lets you enable hibernate mode by clicking the Enable hibernate support check box.
Intel® SpeedStep™ Tab
If your computer has a Mobile Intel® Pentium III processor, the Power Options Properties window includes the Intel® SpeedStep™ tab.
To change the Intel SpeedStep options, click the Advanced button and then click one of the following options:
Disable Intel SpeedStep technology control
l