Grandstream Networks GRP260X Series Administration Manual page 27

Allow SIP Reset
Authenticate Incoming INVITE
MOH
On Hold Reminder Tone
Music On Hold URI
Advanced Features
Special Feature
Feature Key Synchronization
Conference URI
BLF (Busy Lamp Field) – GRP2604 only
Presence Eventlist URI
Eventlist BLF URI
Auto provision Eventlist
BLF Call-pickup
BLF Call-pickup Prefix
Call Pickup Barge-In Code
PUBLISH for Presence
SCA
Allow SIP Notification message to perform factory reset.
The default setting is "No".
If set to "Yes", the phone will challenge the incoming INVITE for authentication with SIP 401
Unauthorized response.
The default setting is "No".
Configures to play reminder tone when the call is on hold.
Music On Hold URI to call when a call is on hold if server supports it.
Different soft switch vendors have special requirements. Therefore, users may need select
special features to meet these requirements. Users can choose from Standard, Nortel MCS,
Broadsoft, CBCOM, RNK, Sylantro, Huawei IMS, Zoom, PhonePower, and UCM Call center
depending on the server type. The default setting is "Standard".
This feature is used for Broadsoft call feature synchronization. When it is enabled, DND, Call
Forward features and Call Center Agent status can be synchronized between Broadsoft server
and phone. Default is "Disabled".
Configures the conference URI when using Broadsoft N-way calling feature.
Configures Presence Eventlist URI to monitor the extensions on Multi-Purpose Keys.
Configures Eventlist BLF URI to monitor the extensions on Multi-Purpose Keys
Select the type of Eventlist to get automatically provisioned onto available MPKs. Whether its
BLF Eventlist or Presence Eventilist.
Configures BLF Call-pickup method:
● Auto:
The phone will do either Prefix or barge in code for BLF pickup depend on which on is set.
● Force BLF Call-pickup by prefix:
The phone will ignore both BLF pickup method, now the monitored VPK will only dial the
extension if pressed
● Disabled
The phone will ignore both BLF pickup method, now the monitored VPK will only dial the
extension if pressed
Configures the prefix prepended to the BLF extension when the phone picks up a call with
BLF key. The default setting is **.
Configures feature access code of Call Pickup with Barge-in feature.
Enables presence feature on the phone.
The default setting is "No".