Using Remote Mouse Receiver - NEC LT75Z User Manual

Using Remote Mouse Receiver

The remote mouse receiver enables you to operate your computer's mouse functions from the remote control (Computer mode).
It is a great convenience for clicking through your computer-generated presentations.To return to the Projector mode, press the
PJ button (lit red).
Connecting the remote mouse receiver to your computer
If you wish to use the remote mouse function, connect the mouse receiver and computer.
The mouse receiver can be connected directly to the computer using the USB terminal.
To connect it to the computer using the mouse (PS/2) terminal, do so using the PS/2 adapter.
NOTE: Depending on the type of connection or OS installed on your computer, you may have to restart your computer or change
your computer settings.
When connecting using the USB terminal
Remote mouse receiver
For PC, the mouse receiver can only be used with a Windows
98, Windows ME or Windows 2000 operating system.
NOTE:
• Wait at least 5 seconds after disconnecting the mouse receiver be-
fore reconnecting it and vice versa. The computer may not identify
the mouse receiver if it is repeatedly connected and disconnected
in rapid intervals.
• When using the PS/2 adapter, be sure to attach the PS/2 adapter to
the remote mouse receiver first. Do not connect or disconnect the
USB connector of the remote mouse receiver with the PS/2 adapter
on the mouse (PS/2) port of your PC. Doing so can result in your
PC failing to detect the remote mouse receiver.
Attach the supplied PS/2 Adapter
When operating a computer via the remote mouse receiver
E-14
Computer
To USB port of PC or
Macintosh
To Mouse (PS/2) port
of PC
7m
30˚
30˚
Remote sensor on the remote
mouse receiver