Table of Contents
Advertisement
Top Features
2
C C
O N
3
T R
O L
A U
D I O
V I D
E O
1. Power Button (ON / STAND BY)
Use this button to turn the power on and off when the power is
supplied and the projector is in standby mode.
NOTE: To turn off the projector, press and hold this button for a mini-
mum of two seconds.
2. Status Indicator
When this is lit red continually, it's warning you that the projec-
tion lamp has exceeded 1000 hours (1500 houres in Eco mode)
of service. After this light appears, it is advisable to replace the
projection lamp as soon as possible. (See page E-36). In addi-
tion the message "The lamp has reached the end of its us-
able life. Please replace the lamp." appears continually until
the lamp is replaced.
If this light blinks red rapidly, it indicates that the lamp cover is
not attached properly or the projector is overheated.
See the Power/Status Light Messages on page E-37 for more
details.
3. Power Indicator ( )
When this indicator is green, the projector is on; when the indi-
cator is orange, it is in standby mode.
4. Source Button
Use this button to select a video source such as a PC, VCR or
DVD player.
Each time this button is pressed, the input source will change
as follows:
RGB
Video
S-Video
If no input signal is present, the input will be skipped.
1
4
S - V
I D E
O
R G
B
5
6
5. Auto Adjust Button (RGB only)
Use this button to adjust Position-H/V and Pixel Clock/Phase
for an optimal picture. Some signals may not be displayed cor-
rectly or take time to switch between sources.
6. Enter Button
Executes your menu selection and activates items selected
from the menu.
7. Cancel Button
Press this button to close the menu.
8. Select (LM
) Buttons
LM:
Use these buttons to select the menu of the item you
wish to adjust.
:
Use these buttons to change the level of a selected
menu item.
9. Menu Button
Displays the menu.
E-10
9
8
7
Advertisement
Table of Contents
