E69077
•
Insert the flat end of the
wheelbrace between the rim and
the hub cover and twist carefully
to remove the cover.
E69078
Wheels and tyres
97
•
Insert the nut key onto the locking
nut (if equipped).
•
Slacken the wheel nuts.
•
Place the jack with the whole foot
area on firm ground.
•
The jack must be applied vertically
to the jacking point.
•
Jack up the vehicle until the tyre
is clear of the ground.
Replacement locks and wheel nuts
can be obtained using the wheel nut
reference number certificate (if
equipped).
E66640
•
Unscrew and remove the wheel
nuts and take off the wheel.
Fitting a wheel
WARNING
Alloy wheels must never be
secured using wheel nuts for
steel wheels.
Note: When changing wheels due
to a puncture or replacing wheel
nuts, please ensure that there is no
lubrication (grease or oil) on the
threads or the interface between
wheel studs and nuts.