•
Connect the positive (+) terminal
of the flat battery in the engine
compartment of your vehicle A
with the positive (+) terminal of the
battery of the other vehicle B
(cable 1).
•
Connect the second lead to the
negative . Connect one end of the
second lead to the negative (−)
terminal of the booster battery A
and the other end as far away
from the battery as possible to the
engine block or the engine mount
of the engine to be started B
(cable 2). Do not connect to
the negative (–) terminal of
the flat battery.
•
Make sure that the jump leads are
clear of any moving parts.
To start the engine
•
Run the engine of the vehicle with
the booster battery at moderately
high speed.
•
Start the engine of the vehicle with
the flat battery.
•
Run both vehicles for a minimum
of 3 minutes before disconnecting
the leads.
WARNING
Do not switch on the headlamps
when disconnecting the cables.
The peak voltage could blow the
bulbs.
•
Disconnect the cables in the
reverse order.
Vehicle battery
93