Reference Adjustment; Reference Adjustment; Ref. Adjust Menu - NEC MultiSync XG85RP-CH Setup Manual

1 2 3 4 5 6
1 2 3 4 5 6

REFERENCE ADJUSTMENT

1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6

REF. ADJUST menu

Adjustments contained in this menu are criteria. The adjustments are
performed once after installation. The projector has only one data
area for all the registered signals.
Further adjustments are not necessary in normal use. Leave the
settings as they are at the factory.
– REF. ADJUST –
1 / ASTIG
2 / BRIGHT UNIFORM.
3 / WHITE UNIFORM.
4 / RASTER CENTERING
5 / FOCUS BAL.
6 / REF.WHITE BAL
NOTE
Items 5 and 6 cannot be selected as they are for service personnel
only. If you try to select one, the "For service personnel only"
message is displayed at the bottom of the screen.
• Press and hold the CTL button then press to display the "REF.
ADJUST" menu.
The "REF. ADJUST" menu can also be displayed by selecting the
"9/REF. ADJUST" item in the ADJUST menu.
ASTIG menu
Adjustment screen
For service personnel only (cannot be selected)
129
Adjustment screen