Kenwood DMX7722DABS Instruction Manual page 41

Settings Settings
Now, you can adjust the <Speaker/X'over>
settings.
1
Display the <SET-UP> <Audio>
→
<Speaker/X'over> screens (page
2
1
Select a car type ( ), select the location
2
of the speakers ( )*, and then display the
<Speaker Select> screen (
Car Setting
OFF
OFF
Front
Lower Door Area
* <Speaker Location> is available only when <X'over
Network> is set to [2 way].
<Speaker Location> for rear speakers is only available when
the rear speakers are selected for <Speaker Select>.
3
Select the speaker type (
size of the selected speaker (
display the <X'over> screen (
→
Speaker Select
35).
3
).
• If a speaker is not connected, select [None].
• When setting the front speakers, select the
speaker size for <Tweeter>.
4
Adjust the crossover frequency of the
selected speaker.
• Adjustable items vary depending on the selected
speaker type/speaker size/crossover settings.
X'over
Front
TW Gain
Gain
HPF FREQ
Slope
Eg. when adjusting <X'over> for front speakers
1
), select the
2
), and then
3
).
16 cm
[dB]
0dB
0dB
30Hz
-24dB/Oct
[Hz]
<Gain>/<TW Gain>
Adjusts the output volume of respective speaker.
<HPF FREQ>/<LPF FREQ>
Adjusts the crossover frequency for respective
speaker.
<Slope>
Adjusts the crossover slope for respective speaker.
<Phase>
Selects the phase for the speaker.
<Time Alignment>
This setting improves the sound field for the seats you
select.
<Position>
You can select either <Listening Position> or <Front
Focus> on the screen. You cannot use both setting at
the same time.
37
ENGLISH