Usb; Playback Operations - Kenwood DMX7722DABS Instruction Manual

Apps Apps
Connecting an Android device with KENWOOD's
Mirroring OA App installed
Connect an Android device with KENWOOD's
Mirroring OA App installed via both USB and Bluetooth
connection (page 6).
Starting USB Mirroring
Preparation:
• Unlock your Android device beforehand.
• Make sure that the KENWOOD's Mirroring OA App
is installed.
• Select [Mirroring for Android] for the <Android
Mode Select> setting (page 12).
1
Connect the Android device.
1 Connect the device with Bluetooth.
– Pair the device with the unit via Bluetooth.
See "Pairing a Bluetooth device" on page 7.
– Select [USB Mirroring] on the profile setting
of the <Device List> screen (page 9).
2 Then, connect the device with USB.
Then follow steps 2 to 4 below on the Android device
screen:
2
Touch the icon of KENWOOD's Mirroring
OA App.
18
ENGLISH
3
Touch [OK] to start KENWOOD's Mirroring
OA App.
4
Touch [Start now] to capture the Android
device screen to the screen of this unit.
5
Touch [USB Mirroring].
On the source/option selection screen (page 12):
Now
Playing
Apple Android Bluetooth TEL
Camera
CarPlay Auto Audio
Apps
Digital Radio

USB

Radio Mirroring
SETUP
The Android device screen is displayed on the
monitor screen of this unit. You can access your
Android device from this unit.
To exit the Android device screen
Press the HOME button on the monitor panel.
USB USB

Playback operations

Start playing the USB
All files in the USB device will be played repeatedly
until you change the source or disconnect the USB
device.
• When no USB device is connected:
Connect a USB device to the USB terminal.
The playback source changes to [USB] and playback
starts.
USB
• When a USB device is already connected:
Select [USB] as the source.
From the Home screen (page 3), touch as follows:
Playback information and key operation
USB